How to Choose Cabinet Doors
The cabinet mainly consists of cabinet, metal, countertops and door panels, while the countertops and door panels are exposed face (table) and clothes (door). There are many kinds of door panels, which are roughly divided into flat panel doors (such as double finishes, Modeling doors (such as solid wood, plastic, covering, etc.), how to choose depends on your decoration style and financial status. My decoration for the modeling door, so need solid wood, plastic, coated door choose one, the final set is Bohui cabinet coated door.
In addition to solid wood doors outside the shape of the door are basically the MDF for the collection, because only the MDF has a good engraving ability, you can carve out a variety of shapes, and solid wood or particle board (common wardrobe closet board material, Also known as particleboard) are not this ability.
Covered door and plastic door appearance similar to the actual big difference, coated door similar to the upgrade of plastic door. Simply speaking, coated door is equivalent to the carved MDF wrapped with PVC film, both front and back have PVC film, also known as 6-coated or 360 degrees coated.
While the plastic door panels are also wrapped with PVC film, but to the left side (back), the left side of the surface through a similar way to deal with putty putty and then spray paint treatment. PVC film can be understood as a non-breathable film, you can control the release of formaldehyde evaporation, because the PVC film wrapped in different ranges, the amount of control of formaldehyde release is different, coupled with plastic spray paint on the back of the door is certainly still easy to produce Solvent-based paint new pollution, plastic door to a certain extent, did not cover the green door, which is why there is a lot of cabinets, one of the reasons to open the door pungent taste. This is one of the reasons why I finally chose Parker's coated door, and why it is even more environmentally friendly.
Of course, environmental protection can not rely on the door alone, as well as cabinet plate. At the same time, the cover door belongs to the door frame and the core material are respectively covered, and then spliced together through the groove, so the level clear, angular, strong sense of three-dimensional. Coated door panels and core can also choose different styles, such as core grid. PVC film with imitation solid wood effect to do when the door is almost impossible to judge is not a real wooden door, but the price must be cheaper than real wood, and the most important thing is that it does not crack.
The plastic door it is the whole door covered with a layer of membrane, rounded edges, although far and covered the door almost, but near the difference is very large, this is the case from the Parker cabinet model comparison can see come out. Relatively plastic coating process is more complex, belongs to the coating process of an upgrade, so the cost is much higher than the plastic process. But blister has the same benefits, that is, its PVC film than the coating thickness, more resistant to scratch, not afraid of bump. As for what kind of personal needs to choose.